Recent Water Damage Posts

How Do You Fix a Leaky Faucet?

11/3/2022 (Permalink)

How Do You Fix a Leaky Faucet?

Are you tired of looking at the leaky faucet in your North Miami Beach, FL home? In this post, I'll show you how to fix a leaky faucet so that it stops wasting water and money in no time!

Find the shut-off valve and turn the water off.

If you want to do this yourself, locate the shut-off valve for your faucet. If you can't find it or just want to make sure that you're doing everything correctly, turn off the main water supply to your house. Turn it back on when you're done.

You may need a tool to help open your faucet. Here are some common tools you might use:

  • Pliers
  • Lever-wrench
  • Pipe wrench
  • Socket wrench
  • Crescent wrench

Remove the faucet handle carefully so you don't damage it.

To remove the faucet handle, first, gently pry it from the spout with a screwdriver. Be careful not to damage the handle in any way; if you need to replace it, use a new one that matches the old style and size as closely as possible.

Remove the packing nut if it's not screwed in too tightly. If it is tight, use this tool.

First, make sure that the packing nut is not screwed in too tightly. If it is, use this tool to remove it. If you are having trouble removing it with a wrench or plier, try gripping the nut with a pair of pliers first.

Pull the valve stem out once you've removed the nut and gasket.

Now that you’ve removed the nut and gasket, it's time to remove the valve stem. You can do this by hand if your faucet has a screwdriver slot on its back. If not, you'll need to use an open-end wrench or pipe wrench to loosen it from the handle. If that doesn't work, use a pair of pliers: clamp onto either side of the valve stem where it meets with the handle, then pull outwards while turning counterclockwise (lefty-loosey). If that still doesn't work, pry off any pieces left with a flathead screwdriver before finally pulling out any remaining parts with needle-nose pliers.

Cleaning the inside of a valve.

Clean up the inside of the valve with some vinegar and a small brush before putting your replacement parts in. This will help remove any mineral deposits that may have built up over time and make it easier for you to get into all of those nooks and crannies.

Once you've done this, use a cloth or paper towel to dry off the valve. And don't forget to turn on your hot water source before starting!

Once you've reassembled everything, turn the water back on and test for leaks by turning on the faucet.

If you find a leak, turn off the water again and make sure all your connections are tight. It's possible that one of them has become loose during assembly or disassembly.

Fixing a leaky faucet isn't so hard after all!

It's not hard to find the leak and fix it. You can do it with a few tools and some patience. You may need to replace the packing nut and gasket, but if you have those on hand already, then it'll be even easier!

There you have it – a simple fix! I hope this guide will help you save some money and get your faucet fixed sooner than later!

What Flooded Basement Causes Are Generally Covered by Home Insurance

7/9/2022 (Permalink)

Causes Of Floods That Many Policies Tend To Cover Or Not Cover

Undergoing a basement flood in North Miami Beach, FL, isn't a pleasant experience. A large amount of damage can potentially occur, especially if the water isn't properly disposed of. Because of this, turning to insurance for flood damage restoration coverage is natural. While most every home insurance policy is different, the following are the causes of floods that many policies tend to cover or not cover.

Covered Damage
If your flood was caused by an unexpected and sudden structural issue in your house, you're likely to receive help from your home insurance coverage. These are some examples of such issues:

  • Burst pipe
  • Ruptured water heater
  • Broken hose

In order to receive any type of compensation, the damage usually has to be quick and unanticipated. This generally occurs when a structural problem develops out of nowhere. It also needs to be accidental, meaning that you had no part in knowingly creating it.

Not Covered Damage
Unfortunately, basement flood damage is more often uncovered than covered. This is most prevalent when a weather issue occurs. If your basement takes on water after a storm, it's unlikely that your policy will cover it. There are usually separate storm policies for homeowners, which are wise to invest in if you live near a coast.

The flood damage may also not be covered if it occurred gradually. Even if you only discovered the damage now, an inspection will probably be held to determine when it started.

Lastly, a flooded basement likely won't be covered if it's a result of lacking proper maintenance. You may not be a mechanic, but your insurance won't assist you if faulty maintenance caused the issue. Letting a toilet leak, for instance, is almost certain to result in uncovered damage.

As a homeowner, understanding your insurance policy is essential. If you experience a basement flood, knowing how to use your insurance can minimize your financial losses. By staying informed, you're one step closer to maintaining a safe home.

Benefits of Hiring a Restoration Company After a Flood

6/6/2022 (Permalink)

The Advantages of Hiring a Flood Restoration Company

No matter how vigilant you are about maintenance and repairs, a sudden water loss can harm your building in North Miami Beach, FL, and disrupt your business. Some property owners try to clean up the mess themselves, but there are several benefits of hiring professionals for pipe burst cleanup.

Salvage for Damaged Items
A broken pipe does more than just destroy insulation and saturate walls. It can also damage any items in the path of the water:

  • Furniture
  • Electronics
  • Carpet
  • Documents
  • Manufacturing equipment

Certified technicians who specialize in item recovery may be able to salvage things that are damaged in a flood. At the very least, they can help you discern between what needs to be replaced and what can be repaired.

Comprehensive Pipe Burst Cleanup
There are several perks of working with a company that handles both the mitigation and restoration of your building. It streamlines the process, allowing you to get back to business in a shorter period of time. Having one team that does everything improves communication and documentation, too. Finally, it makes the prevention of secondary damage easier, as the final test doesn't have to happen until the whole job is complete.

Disinfection After Sewer Backup
Not all water that floods your building may be clean. If a toilet overflows or the sewer backs up in the pipes after a heavy storm, you must make sure that the affected area is not just dry but sanitized. A sewer cleanup company takes the appropriate measures to disinfect the area and then runs tests to ensure that all bacteria are eradicated.

When you need pipe burst cleanup or sewer remediation, it's best to leave it to the professionals. Certified technicians have the training and experience necessary to take care of all your mitigation and restoration needs and can help you prevent further damage.

3 FAQs About Water in Your Basement and Insurance

5/2/2022 (Permalink)

3 Frequently Asked Questions About Basement Water And Insurance

The last thing you want to experience is a basement flood, but you still need to be prepared for one. That means understanding what your homeowner's insurance will cover. Here are some frequently asked questions about water sources in your basement and your insurance company's response.

1. Is a Pipe Burst Covered?

Generally, a basement flood caused by a burst pipe falls under the sudden and accidental clause in your policy. This means your insurance will pay for water remediation professionals to dry out your home and fix the damaged flooring and walls. Additionally, your insurance coverage will typically pay for any damage in your basement if you live in a duplex and your neighbor's pipe bursts.

2. Is Damage From a Storm Covered?

Damage that comes from factors outside of your home is another thing. A standard homeowner's insurance policy typically does not cover damage from natural disasters, including hurricanes, thunderstorms, or blizzards. However, you can get a separate flood insurance policy to protect against this type of event. This can be added to your homeowner's insurance or purchased as a single option through another company.

Although they can be crucial, very few homeowners have flood insurance policies. Even though mortgage lenders only require flood insurance policies in high-risk areas, it is a good idea to have this no matter where you live. After all, flooding can occur anywhere.

3. Is Groundwater Seepage Covered?

Sometimes, a basement flood can be caused by groundwater seeping through the cracks in the foundation of your home in Hialeah Gardens, FL. The damage is generally not covered in these cases. This is because regular maintenance can often prevent groundwater seepage. Be sure to have your foundation inspected regularly and perform any recommended chores.

Since a flooded basement can occur in any home, it is important to understand what is covered by your insurance company. These frequently asked questions will give you a head start so you can find out what your policy covers.

What to Do When You Have Water Damage

2/4/2022 (Permalink)

Restoration machines are cleaning a house after water damage. SERVPRO has team members ready 24/7/365 to assist you after any kind of water damage. Call us!

What To Do If Your Home Has Been Flooded

As a homeowner, at some point, you will likely experience flooding in your home. Whether from an overflowing toilet or sink, a broken water heater, a heavy storm, or broken pipes, water damage is a fact of life in Bal Harbour, FL. It’s best to call professionals to take care of repairs and water cleanup, but here are some things you can do while you’re waiting for help to arrive.

Focus on Safety

Your first concern should be your and your family’s safety. Depending on the water source, the water itself can be a significant health hazard, so if the water isn’t clean, leave the cleanup to the professionals. Keep the following in mind:

  • Only do activities that are safe to perform, and wait until professionals arrive if you are unsure.
  • Electrical and “slip and fall” hazards are common concerns, so be aware of electronic appliances and watch your footing.
  • Remember that waterlogged furniture and other materials can be heavy, so be careful when trying to move anything out of the water.

What to Do While You Wait for Help

Depending on the amount of water damage and your safety assessment, there are some activities you can do to help with water cleanup before professionals arrive or after they begin cleanup efforts. If the amount of standing water is minimal, you may be able to remove excess water by blotting or mopping. Additional activities include:

  • Removing upholstery and cushions and propping up to dry
  • Turning on the air conditioner, if available, during warm weather
  • Removing area rugs
  • Gathering loose items from the floor
  • Wiping water from the surface of wood furniture

The important thing, though, is to leave most of the cleanup up to the experts. Water damage in Bal Harbour, FL can cause serious health hazards like mold and bacteria growth if not addressed quickly and thoroughly, and a professional crew will have the equipment needed to get the job done right.

Common Examples of Secondary Water Damage

12/9/2021 (Permalink)

Secondary Water Damage: Typical Cases

If your home in Miami Shores, FL becomes flooded with water, it’s easy to become overwhelmed by the idea of restoring your home. While primary damage is the direct result of water damage, if water is left to sit, secondary damage, such as black mold growth, can occur.

1. Loss of Personal Items

Though personal items may not be immediately damaged by water, water that is not removed immediately and high humidity can cause some belongings in your home to deteriorate. Items such as chairs, desks and other pieces of furniture may be affected by standing water and high levels of humidity. Belongings made of wood are particularly susceptible to damage as they may rot quickly.

2. Mold Growth

The potential for mold growth is a major concern that is often overlooked when a home is affected by water damage. Since mold most often grows close to water, damp areas with high humidity levels as a result of flooding create the perfect environment for mold. Mold can grow in a matter of days, and black mold, a type of mold that can be particularly hazardous, can cause extensive damage to a home and can create health risks.

3. Structural Damage

Though a pipe leak and minor flooding may seem to be a simple problem to fix, if water is not quickly removed, structural damage can occur. Floors and ceilings can become damaged due to consistent leaks, and in some cases, replacements are necessary. When a flood affects a larger area of your home, everything from drywall to the home’s foundation can become badly damaged if water remains in the area.

Although black mold and other types of secondary damage can cause major damage to your home, quickly removing water from affected areas can help to prevent such damage from occurring. As you begin the cleanup process, you might find it helpful to work with water damage restoration experts.

How Water Damage Can Affect Flooring

11/5/2021 (Permalink)

How Can Water Damage Affect Your Flooring?

When dealing with damage caused by a pipe break or flooding one of the first concerns many homeowners in North Miami, FL, may have can be for their floors. Damage can occur regardless of the type of flooring, and treatment may be different in each case.

Cement, Stone or Tile Flooring

Tile, stone and cement are common flooring types found in basements, laundry rooms, bathrooms, and kitchen areas where water damage is the most likely to happen. Damage to these floors occurs most often when water gets into cracks and seeps under the flooring. Here are some signs to look for:

  • Loose tiles
  • Stains around chips or cracks in the flooring
  • Hollow sounds beneath stones or tiles
  • Areas where the grout or caulking is crumbling

Carpeted Flooring

A pipe break can occur in other areas of the house and cause damage to carpeting. In most cases, restoration may be possible if the carpet can be thoroughly dried. It’s also important to be aware of the water source in cases like these because carpeting damaged by an unclean source should be replaced. Signs of damage may include:

  • Staining or discoloration of the material
  • A change in the material’s texture
  • Loose material or spot like bubbling in areas near a water source

Wood Flooring

The type of wood your floors are comprised of can have a direct impact in how much damage they may endure. Hardwoods don’t soak in water as quickly as soft woods, so hardwoods may be more resistant to damage. Sealants may also help. Some signs of damage in wood floors include:

  • Buckling or cupping areas in the wood
  • Wearing or pealing sealant
  • Discoloration in the wood

A pipe break or flooding can cause water damage to your flooring. Whether you have wood flooring, tile or carpet, restoration professionals in North Miami, FL, may be able to help. Remember, the affects water damage can have on your floors can vary by flooring type. Drying and restoration methods may also be different.

Cleanup After a Sewer Flood: What You Can Expect

8/18/2021 (Permalink)

Cleanup After a Sewer Flood: What You Can Expect 

As a homeowner, few events are likely to be as stressful for you as a sewer backup. When this occurs at your North Miami, FL, home, you may not know where to begin when it comes to cleanup efforts. Calling a professional cleanup and restoration company to handle the contaminated water safely can be an effective first step, and knowing what to expect once they arrive to handle the sewer cleanup might help you feel more confident about the outcome.

1. Mitigation

Once the flood technicians arrive, they will likely take immediate action to prevent contaminated water from a flooded toilet or another sewage issue from entering additional areas of your home. This can include removing some of the water right away and sealing off the area so it remains contained. They might also tell you and your family to leave the immediate area to avoid being contaminated by the sewage water.

2. Water and Sewage Removal

Sometimes, localized flooding can cause a sewer backup that floods into your home via your toilet or enters your home from sewers that have backed up outside and mixed with flood runoff from streams or rivers. Cleanup technicians have the know-how and equipment that allow them to remove this contaminated water from your home and dispose of it safely. This can offer you peace of mind that the issue is being handled by professionals who can advise you on how to proceed with cleanup efforts once the water is removed.

3. Sanitation and Deodorizing

After a sewer cleanup, unpleasant smells may be left behind and linger in your walls or floors. Flood technicians may offer you sanitation and deodorizing services to ensure the space is left smelling fresh and clean after a flood. Special solvents and industry-approved cleaning apparatus can remove all traces of a sewer mishap and ensure the odors do not return.

A sewer cleanup should only be handled by qualified flood technicians in your North Miami, FL. However, understanding the process can help you feel more confident that your happy home can be returned to its former glory.

How To Confirm a Shower Leak

7/9/2021 (Permalink)

If you let a bathtub leak go too long, it will probably end up being a rather expensive fix in Miami Shores, FL. It's important to be vigilant with your bathroom appliances to avoid water and mold damage spreading to the rest of your house.

Initial Signs

If you've found this article that probably means you've begun to suspect a shower leak. What are the signs you should be noticing if that were the case? They can be subtle, although they are causing a lot of hidden water damage. Some suspicious activity includes:

  • Stains on the ceiling below the shower
  • White, crusty stalactites hanging in your crawlspace
  • Loose floor tiles in the bathroom
  • No other fixture in your bathroom leaking

Testing the Shower Pan

Initially, you can start testing a shower pan leak by thumping the tile and picking the grout. This can start to expose the weak points that may exist. However, the real test comes when you fill it with water. Be sure to cover the drain so nothing escapes, and then fill it to about an inch below the threshold. It helps if two or more people are with you so that someone can keep an eye on all areas it could be leaking to below. Bring a flashlight- even in a lit room, it will help you to see the water.

Other Shower Components

The problem might not be your shower pan, it could be one of the other shower components causing your bathtub leak. First look at your tub faucet, be sure to check for any loose escutcheons. If your shower arm is loose, it might mean that there is a fitting leak inside the wall. You could either cut the wall or use a shower arm escutcheon and setscrew to fix it temporarily. You should also check the door, glass, and hardware if you have any.
You can do a lot of this bathtub leak testing yourself, but if you find a leak you'll need to bring in a plumber to do a full assessment and repair, anyway. Keep a wary eye to the ceiling and you'll go far!

When and How To Check Your Water Supply Lines

3/19/2021 (Permalink)

One thing many homeowners don't think of is their plumbing supply lines. They are just always there and functioning right up until they are not. Checking for supply line damage should be an important part of your yearly home maintenance. If you live in a climate with rapidly changing weather, you might need to check them more frequently. Remember, supply lines usually have more pressure than drainage lines. This means that they are more subject to wear.

Types of Supply Lines

Like most things in life, there are a few types of supply lines that your home might contain. All of these might be the cause of a supply line leak. These are:

  • PEX - flexible tubing
  • PVC - hard pieces of piping
  • Copper - an older metal type
  • Galvanized metal - only found in older homes

How To Check Your Supply Lines
If you have a bathroom leak, you obviously will need to check the supply lines. The better thing to do is check them before they start leaking and you wind up needing a flood or mold remediation; company.

Start by checking the actual connections making sure they are tight and not corroded. There are over 21 types of corrosion that can easily cause supply line damage.
You can do this by starting at one end of your water system and working your way to the other. You can find supply lines behind your toilet, under your sinks, on your water heater and to your washer.
Then check for cracks or breaks in the outer housing of the pipes. You might think that this can only happen with old pipes, but any pipe under pressure can develop issues.
Pay attention to small leaks or water dripping. Sometimes, there are signs of water, such as rust stains, damp surroundings and buildup around the line.
Checking for supply line damage should be an important part of your routine. It is easy to do and can prevent major flooding and damage to your home.

Take These Steps When Your Toilet Floods

2/9/2021 (Permalink)

What To Do When Your Commercial Toilet Floods 

One of the main reasons for sewer damage in North Miami Beach, FL, commercial properties is the flooded toilet. Unfortunately, there are quite a few possible causes of an overflowing toilet:

  • Inappropriate items or too much of something is flushed and clogs the pipes.
  • The valve, float bobber, or other components in the tank are damaged or malfunctioning.
  • The seal around the fill valve has become loose.
  • There may be a clog (or clogs) along the sewer line.

The resulting damage can be pretty bad, no matter where the overflowing toilet is located, but when that toilet is on the second or third floor of a building, there may be damage on multiple levels.

Contact Professionals
The first step you should take is to contact a plumbing professional or the local sewage company because the damage will continue to occur until the main cause of the problem has been corrected. This is especially important if there's a clog deep within the sewer system or if your building has an older plumbing system that could suffer further damage during repairs.

Remove Water
Next, clean up as much water as you can. The longer that water is left to sit around the toilet, the further it will seep into building materials. After mopping up as much water as you can, open windows, add fans and take other steps to further dry the area. Remember that it doesn't take long for wet building materials to create an environment where mold spreads quickly.

Schedule Restoration Services
As soon as possible, get water damage cleanup and restoration professionals to assess the damage and determine the best method of restoring your property. Restoration technicians may locate areas between the floors of the building that need attention, so you can avoid more expensive repairs down the road. These technicians will also take care of immediate needs, such as disinfecting any areas that were exposed to bacteria and waste carried in by sewer water.
Your commercial property requires high-quality results following sewer damage. Contact professionals, such as plumbers, sewage company representatives, and restoration experts right away.

Does Filing an Insurance Claim Automatically Raise Rates?

1/6/2021 (Permalink)

Your first thought after a disaster happens to your home may be about filing an insurance claim in Miami Shores, FL. It’s a reasonable thought! However, before you do, you should consider several factors, including

  • The cause of damage
  • The amount of damage
  • The size of your deductible

Why Does the Cause of the Damage Matter? 

Many reasons! First off, the nature of the claim is extremely important to insurance actuaries. They combine quite a few factors to make a judgment about how many claims you’re likely to have, as well as how much damage is typical.

If you file an insurance claim for a dog bite on your property, that’s a perfect example of a claim that scares insurance companies. A dog that bites a human once is much more likely to bite again, according to statistics, so it’s highly likely to raise your rates. Other red flags can include

  • Slip-and-fall claims
  • Water damage
  • Black mold


Another example is a home flood. Standard homeowner’s insurance does not cover damage from a flood that enters your home from outside. Yet even though the damage isn’t covered, trying to make a claim could still potentially raise your rates if insurers believe you’re in a high-risk zone.


What About the Deductible and Amount of Damage?
Filing a claim for small amounts of damage is usually a bad idea. Often, your damage deductible will be higher than small claims anyway, so before you even consider doing it, read your policy to determine where the reimbursement kicks in.
The number of claims made on a policy is a major determiner of rate increases. It often doesn’t pay to have a low deductible, since the commensurate rate hike can eliminate any advantage you gain. Ideally, instead of a low deductible, put a couple of thousand dollars in an interest-bearing savings account and use it to pay an affordable, local restoration company to repair the damage.
Once covered damage types exceed around $2,000, an insurance claim may be worth it. Ideally, talk to your insurance agent before anything happens to get a sense of what types of damage you should make claims for.

Insurance Companies and Pipe Damage

10/5/2020 (Permalink)

If cold temperatures cause your pipes to burst and water to damage your wood floors, your homeowner's insurance may cover it. It depends on what happened. Generally, your insurance coverage will protect you from water damage, but it all depends on what caused the issue. Read on to learn more about insurance companies and pipe damage.

Different Types of Damage

Gradual damage, such as a leaky pipe or a crack in the foundation, is a reason insurance companies won't pay for the damage. This is because no insurance company covers problems due to poor maintenance. But they will pay for sudden damage. Sometimes, it can be hard to know if you have something gradual or not. Things that are covered can include cracked water tanks, exploding dishwashers, and burst pipes. Here are some key things to remember:

  • Your Insurance covers damage that is sudden and unforeseen
  • Your Insurance does not cover gradual damage

How Insurance Companies View Pipes
Insurance companies generally consider plumbing to be part of a home's normal maintenance. Property owners are responsible for making sure that pipes are properly maintained. If you don't maintain your pipes, any damage will not be covered. However, leaky pipes are different from burst pipes. These are pipes that could flood your home. So the damage they bring is typically covered.
Keep in mind that this does not apply to burst pipes and a flood if you live where it is cold and do not have heat. Burst pipes must happen suddenly, by accident, and not be preventable. In other words, if you ignore a leaky pipe and it bursts, it will not be covered.
If you're not sure if your insurance company will cover those remediation professionals you had to hire, you should consider the type of damage that happened to your home in Surfside, FL. Remember if you didn't fix the broken pipe when there was a small leak, the subsequent burst pipe will not be covered. If you did take care of your home than any flood damage will likely be covered by your insurance.

What Are the 3 Categories of Water Damage?

8/18/2020 (Permalink)

What Do These Categories Mean?

There are three standardized categories of water damage that indicate the level of repair required for your commercial building’s water pipe repair. Those three categories are known as:

Category 1: Clean water
Category 2: Gray water
Category 3: Black water

But what do these categories mean, and what do you need to know about them when you have a broken pipe or your building is flooded?

Category 1: Clean Water
“Clean water” refers to flooding that does not pose any threat to human health and safety. This type of water damage typically occurs from a broken pipe along a water supply line, an overflow from a sink or tub, or a malfunction in an appliance that is connected to a water supply line.

Category 2: Gray Water
“Gray water” is a type of flooding that contains microorganisms and is potentially harmful to humans if ingested. It often comes from water sources such as broken toilets or broken sump pumps. It is important to address water pipe repair right away in this scenario.

Category 3: Black Water
“Black water” contains harmful bacteria and fungi and is highly unsanitary. It is likely to occur from a broken pipe along a sewage line or from standing water. This means that if any flooded area is left unattended, it is likely to develop into black water even if it started out as clean water.
It can be difficult to identify the category of water damage that your building has incurred and the type of water pipe repair that it requires. Even if you only have Category 1 water damage, it is still critical getting help from your local water damage restoration experts right away, as it might develop into a much more severe issue if left stagnant for even a few hours. If your water damage is Category 2 or 3, it is even more important to address the issue right away. Luckily, SERVPRO of Bal Harbour, FL, is Faster to Any Size Disaster.

Understanding flood damage restoration and mitigation process

6/1/2020 (Permalink)

Water destruction from storms is a regular occurrence in South Florida due to the average sea level of the state being 6 feet, with some areas being as little as 3 feet above sea level. Sadly, water harm is one of the most difficult issues that a land owner can confront. Even, modest quantities of water harm can prompt genuine repercussions, for example, overgrowth of mold and overall damage of your valued structure. When managing water destruction in your home or business, it is significant to call an expert to alleviate water damage. You are managing dangerous, class 3 water deterioration.

Throughout the years, a settled convention for the rebuilding and alleviation of water harm has grabbed hold. Here is a list of compelling methods for relieving flood harm. As a rule, the rebuilding procedure follows five stages. How about we investigate the water cleanup process and what steps are engaged with managing potential flood harm.

On the off chance that the rebuilding organization can start the water cleanup process inside the initial five hours of harm, the odds of an all out reclamation of the property are higher. Then again, standing by over 24 hours will make the odds of lasting harm ascend, as time passes.

  1. SERVPRO of North Miami will start surveying the degree of water in the home or water in the business. Using propelled discovery gadgets, they will have the option to check whether there is water in the structure that has saturated spots not unmistakable to the unaided eye. In the event that there is a functioning funnel break or supply line break, the progression of water will be stanched, and the channel break or supply line break will be shut, with a welder, if essential.
  2. The subsequent stage is to evacuate the water utilizing powerful siphons and concentrated vacuum gear.
  3. Next, the overflowed home will start experiencing the drying procedure. This includes the utilization of modern quality drying hardware, like that utilized in huge vehicle washes. The group will likewise convey ground-breaking dehumidifiers, which are equipped for evacuating a huge number of pounds of dampness from the air every hour.
  4. Now, with the drying procedure complete, there will be no further hazard to the property, expecting the main drivers of the stockpile line break, pipe break, or other wellspring of flooding have been appropriately tended to.
  5. After the property has been dried, any things that were expelled from the premises will be altogether cleaned. Utilizing a procedure like cleaning, extraordinary synthetics will be sent that are equipped for cleaning and reestablishing such things as photographs, books, and furniture. The cleanup group will likewise utilize unique sterilization items, which are equipped for killing any beginning buildup or form developments just as wiping out unsavory scents that frequently result from the water logging of materials, considerably after they have been totally dried out.

Presently the cleanup procedure will be finished. The property will be totally reestablished to its earlier condition, and the whole procedure will as a rule have taken close to 24 hours, from call to the group leaving once and for all.

Steps To Troubleshoot a Leaky Toilet

5/23/2020 (Permalink)

Even the smallest water leak in your home can cause a lot of damage, especially if the drip, drip is allowed to continue. A leaking toilet has the potential to harm flooring materials and to create excess moisture that enables mold to form into colonies. If left for too long, it can even cause structural damage to your house in Biscayne Park, FL. A leak should always be stopped quickly. If the problem is complicated, your best bet is to call in a licensed plumbing contractor. For simple problems, you might want to tackle the problem yourself.

Fixing a Leaking Toilet

Most toilets that leak do so from the base. If you are lucky, you will only need to tighten the bolts that hold the toilet base to the floor. If that doesn't stop the bathroom leak, you will probably have to remove the toilet and check the wax gasket. Follow these steps to troubleshoot the problem:

  • Shut off the water to the toilet
  • Drain the water in the tank by flushing and holding down the handle
  • Loosen and disconnect the water-supply tube
  • Remove bolts that hold the toilet in place
  • Gently rock the toilet back and forth until the wax seal breaks
  • Remove the old gasket and replace with a new one

Now it is time to reassemble the toilet and see if your repair worked. If not, you could have a faulty flange which will probably have to be replaced.

Handling Water Damage
Any time excess water comes into your home, it should be taken care of right away. An experienced water remediation franchise has the equipment and the training to handle everything from a leaking toilet to a sewage backup. Though no two problems are exactly alike, certified technicians have the versatility to deal with whatever they face. Best of all, you can be assured that work on your home is completed according to the highest standards.

How To Prevent Plumbing Problems at Your Business

5/9/2020 (Permalink)

If you own your own business, chances are you’ve come across a plumbing issue during the course of your operations. To avoid potentially expensive disruptions in your Miami Shores, FL, business in the future, be proactive, and address plumbing problems even before they arise.

Understand the Problems

Due to the volume of people coming in and out each day, commercial buildings typically experience heavier water usage than residential buildings. This can place severe stress on your plumbing system, leading to potential plumbing issues. The following are some of the most common and costly plumbing issues that a business owner can face:

  • Low water pressure
  • Water line pinhole leaks
  • Faucet leaks
  • Parking lot drain clogs
  • Toilet leaks

Be Prepared
To keep these plumbing problems from occurring, you’ll need to have a relationship with a reputable local plumber. Your regular plumber should have a thorough knowledge of your commercial building’s plumbing system, allowing him or her to spot and monitor potential problems before they become major issues. A professional plumber can also direct you to the appropriate water remediation experts should a plumbing issue damage your property.
If you don’t yet have a relationship with a professional plumber, ask business associates, friends, and family for recommendations. Always be sure to check for a valid state plumber’s license before you retain any plumber’s services.

Practice Preventative Maintenance
Your plumber should perform regular preventive maintenance to keep your commercial building’s plumbing system in working order. Regular checks of your building’s pipes should be performed, especially during times of extreme temperature change that can cause a broken pipe. In addition, professionals will pay special attention to your water main, checking for leaks and corrosion that can compromise this important plumbing component and your commercial building’s overall water supply.
Plumbing problems have the potential to create long-term consequences for your business. However, by taking care to maintain your plumbing systems before any issues occur, you’ll allow your business to flourish instead of flounder.

Why Is Secondary Damage So Serious for Your Home?

2/11/2020 (Permalink)

Water damage to your home doesn’t stop at the water line. The humidity in an enclosed area will skyrocket in a flood, thanks in part to the moisture-wicking action of porous materials. This secondary damage may be light, but it can be very serious, even threatening the structure of your home. Homeowners in Bal Harbour, FL, should be aware of this if they have any flooding or a burst pipe.

What Is Secondary Damage? 

The standard definition of secondary water damage is damage to absorbent materials caused by prolonged indirect exposure to high humidity, but not to direct contact with water. This sort of damage includes

  • Buckling and warping wood
  • Soaked drywall
  • Peeling paint and wallpaper
  • Stains, black mold and bad odors
  • Ruined carpets

Damage can also occur to personal items such as photographs, paperwork, electronics, and books. Humidity should be kept between 40 – 50% in most cases for an ideal balance, although special cases, such as dehumidifying a library or running a vaporizer for someone who is ill, may alter that.

What Should You Do About It? 

Minor flooding on non-porous materials that doesn’t go up to the outlets may not require professional help. For instance, flooding in a concrete basement with cinder block walls can be pumped out by you, as long as it’s done quickly. Quickly is the key word here – every hour the elevated humidity has to act is working against you. Once the wood starts rotting, it’s going to attract wood-boring insects.
If the damage has been significant or is in any way structural, you’ll need a professional restoration company experienced with water damage repair to bring in custom air movers that can quickly suck the humidity out of a given area. Once things are dry, a full inspection will help reveal any areas of concern.
If you’ve experienced a water intrusion in Bal Harbour, FL, a speedy response will save you considerable aggravation and potentially many thousands of dollars. SERVPRO is Faster to any size disaster, and they have the specialized equipment to get the moisture out and determine how extensive the damage is.

How To Properly Maintain Your Commercial Irrigation System

1/28/2020 (Permalink)

Basic Irrigation Maintenance

Having a properly maintained irrigation system is essential to the well-being of your commercial property. By relying on this technology to water your lawn and plants, you can save a significant amount of time while enhancing the appearance of your business’s exterior. To consistently keep your North Miami Beach, FL, property in top condition, it’s crucial to maintain your irrigation system properly. Here are some basic irrigation maintenance guidelines that can help you preserve the appearance of your commercial property.

Schedule Regular Inspections

To confirm that everything is in working order, be sure to schedule a regular checkup with your landscape company. During scheduled maintenance, your landscaper can inspect any of the following areas:

  • Sprinkler heads
  • Valves
  • Nozzles
  • Pipes

In addition to examining these parts, a professional may give your irrigation system a good cleaning to keep it in proper shape. Remember to schedule these inspections at least twice a year to ensure that there are no leaks or other issues that may lead to sprinkler flooding.

Use in Moderation

To ensure that your irrigation system is at its best, always use it in moderation. Save your sprinklers for dry days only and don’t let them run all day long. Instead, try to set your irrigation timers to go off in the early morning, preferably between 4 a.m. and 10 a.m. Not only can this irrigation maintenance strategy ensure that you don’t get your customers wet, but it also allows the water to reach down to your grass’s roots without being affected by intense sunshine or high winds.

Perform a Plant Audit

Be sure to give your plants the right amount of attention when running your sprinklers. Newer plants need more nourishment than older plants, so adjust your irrigation timers accordingly. This ensures that your plants aren’t overwatered and keeps sprinkler flooding at bay.
Maintaining your irrigation system is a crucial part of your job. However, if your sprinkler system causes any water damage despite your best irrigation maintenance efforts, be sure to call commercial building restoration services to bring your business back to normal.

4 Things You Should Do If Your Toilet Overflows

12/5/2019 (Permalink)

4 Things You Should Do If Your Toilet Overflows

An overflowing toilet in your Sunny Isles, FL, home can be frustrating and difficult to deal with. There are many reasons that this might happen, from a simple clog to sewer damage. Whatever the cause, the following are a few things that you should do in this situation.

1. Turn Off the Water Source

If your toilet is overflowing and will not stop, then this means something is supplying water to the area. If there is a clog or sewer damage and the water cannot properly drain, it can sometimes back up into the toilet, sink or shower. One way to help is to avoid using appliances, such as dishwashers or washing machines, that use water. In some cases, you may need to turn off the water supply to the building.

2. Block Off the Area

If the flooded toilet has caused a significant amount of water to back up and overflow into the bathroom, then you might need to close off the area. If you don’t, the water can continue to spread and can end up affecting a larger area of the house. Boards and tarps are possible ways to do this.

3. Remove Items From the Area

You don’t want water from the toilet to damage your belongings, so move what you can to a dry location. Any items that have already been affected should be set aside as well. A professional service might be able to salvage them if the damage is not severe.

4. Clean and Sanitize

Because there might be sewage water entering your home through the toilet, it is important that the area is thoroughly cleaned and sanitized. If there is an extensive amount of water, it is best to contact a sewage company to handle the problem for you. This water is likely category 3 and highly contaminated, so you should avoid contact with it.
If sewer damage, broken pipes or a clog has resulted in water damage in your home, you should call a cleanup and restoration company to return your home to its previous condition. They can make any necessary repairs to the building and affected belongings.

How To Spot Water Damage

10/8/2019 (Permalink)

Water damage may seem like something that would be obvious to detect. Things like buckled wood and discolored ceilings are dead giveaways, however, some of the most common signs of water damage are far more difficult to spot. Most of the time, water damage is actually located underneath your home’s floor boards, behind your home’s walls, or even somewhere on the outside of your house. Residential water damage and commercial water damage alike can be extremely costly for the property owner, especially when not identified early on. As such, it is extremely important to be aware of some of the most common water damage warnings.

A homeowner has a lot of things to think about and scanning the house for water damage is probably low on the to-do list. Nevertheless, being aware of some of the more typical indicators can save you and your family a ton of money in the long-run. Keep the following list in mind for how to spot water damage:

  • Foul odors are often an indication of residual water and mold growth
  • Stains present on ceilings and walls
  • Mold growth
  • Painting peeling
  • Discoloration of the ceiling
  • Bubbling or cracking wallpaper or paint
  • Changes in floor texture such as buckling, warping, expanding, or sinking
  • Leaking or pooling water behind appliances
  • Issues in the attic and/or roof like mold or staining
  • Exterior home damage near gutters

Being knowledgeable about the potential signs of water damage is the first step in mitigating the financial cost and overall damage caused. If you have spotted any of the above indicators throughout your home, it is imperative to contact a professional water damage team right away. At SERVPRO, we are dedicated to unmatched customer service, high-quality work, and making it “Like it never even happened.” Call us today to learn more!

Water Damage and Flood Insurance in Miami Florida

6/14/2019 (Permalink)

Water Damage & Insurance in Miami:

Most insurance rates vary by company. Rules for insurance vary by state.  Flood insurance is an exception.

Most property insurance does not cover flood damage.

Some homeowners’ policies will cover water damage if the damage comes from:

  • sewer or drain backup
  • sudden & accidental damage from plumbing, heating systems, or air conditioning

The policy might also cover mold remediation, but not if a flood caused the problem.

How to get flood insurance in Miami:

  • Check whether your community participates in the National Flood Insurance Program (NFIP). You can still get flood insurance if you live in a low-risk area. The insurance will cost less if you live in a low-risk area.
  • Find an insurance agent in Miami. The NFIP is the only flood-insurance provider, but the government does not sell it. Buy the insurance through an insurance agent. The NFIP sets the rates.
  • If your insurance agent doesn’t know about the NFIP, call the help center at 1-800-427-4661

Links:

https://www.usa.gov/property-insurance

www.fema.gov

The 1st 24-Hours of Water Damage Is Critical For Your Miami Home or Office

6/14/2019 (Permalink)

You know and we know that, after a flood sweeps over your property, there isn’t a lot of time to think about who you’ll call or what you’ll do about it. Often, within the first twenty-four hours, processes such as mold growth start happening and it becomes a problem that needs professional attention. You may think that you can handle these issues without the help of specialists; but that usually ends up putting off the inevitable—a phone call for help. When the timer starts on a catastrophe, these post disaster hours tick away quickly and, the next thing you know, the problems that could have been easily addressed have now become bigger issues that require your outside help to work that much harder. Before it gets that far, call SERVPRO of North Miami, and let us put our hi-tech equipment and knowledgeable personnel to work for you.

Water Damage Tips For Bal Harbour Homes And Businesses

6/5/2019 (Permalink)

Protect Yourself From Water Damage In Bal Harbour

If your home or business in Bal Harbour has water damage, you can do some things before help arrives.

Make sure that the building or home is safe.

SERVPRO of North Miami Wants You to Remember:

  • Waterlogged materials are very heavy
  • Wet surfaces are slippery
  • Make sure that electrical power is off before you handle devices
  • Make sure you are standing on dry area before you turn on electric power

SERVPRO of North Miami suggests that you:

  • Remove excess water with mops and/or towels
  • Wipe water from wood furniture or other items
  • Remove wet cushions. Prop them upright to dry
  • Hang up rugs to dry
  • Place foil or blocks between furniture and wet carpeting
  • Turn on dehumidifiers or air-conditioning if it is safe
  • Move colored items from wet carpeting
  • Move artwork to a safe, dry place
  • Move loose items from the floor or counters
  • Start drying items ASAP
  • Remember that mold starts growing within 24 hours
  • Stay away from rooms that have sagging ceilings

***

Links:

www.fema.gov

Flood Waters Can Affect Your Surfside, Florida Home

5/28/2019 (Permalink)

Be proactive and have a flood plan ready if disaster strikes your property in Surfside, Florida.

You know and we know that, after a flood sweeps over your property, there isn’t a lot of time to think about who you’ll call or what you’ll do about it. Often, within the first twenty-four hours, processes such as mold growth start happening and it becomes a problem that needs professional attention. You may think that you can handle these issues without the help of specialists; but that usually ends up putting off the inevitable—a phone call for help. When the timer starts on a catastrophe, these post disaster hours tick away quickly and, the next thing you know, the problems that could have been easily addressed have now become bigger issues that require your outside help to work that much harder. Before it gets that far, call SERVPRO of North Miami, and let us put our hi-tech equipment and knowledgeable personnel to work for you.

Preparing for Unexpected Rain in South Florida

2/4/2019 (Permalink)

February typically marks some of the most beautiful weather that South Florida sees all year round. And while we have been lucky to have pleasant days and cool nights, the last few weeks have also brought some unexpected rains. Rainy season in Florida typically runs from May through October, but any true Florida resident will attest to the fact that rains can come and go at any time. As a homeowner, it is important to be aware of quickly the weather can change from beautiful and sunny to dark and stormy.

Keep the following tips in mind to prepare your Florida home for unexpected rain over the next few months:

  1. Get your roof inspected to ensure there are no concerning areas
  2. Be sure that all windows and doors are secured and properly closed before leaving the house
  3. Remove any outdoor equipment that could be susceptible to rusting in rain
  4. Keep your gutters clear of any debris
  5. Inspect the interior of your home for any signs of leaks (focus on the walls and ceilings)
  6. Apply waterproof sealer to any areas of your outdoor patio that may need some extra protection
  7. Keep your garage door closed
  8. Check in with the weather channel here and there to be aware of any impending storms

Water damage like flooding and leaks can be a major headache if not handled right away by a professional service. At SERVPRO, we are dedicated to providing 24-hour emergency service for all types of water damage in your home. Contact our water restoration and damage repair technicians today to learn more!

Flood Safety Tips for Florida Residents

10/9/2018 (Permalink)

South Florida homeowners are no stranger to heavy rains and flooding areas. While the drainage systems throughout the Sunshine State have improved significantly over the years, there are still a sizable number of regions prone to flooding. From coastal storms to heavy rains and from overflows of canals and lakes to storm surges, it is important to be aware of the dangers linked to flooding and the critical safety measures to take in the event of a flood. While it may surprise some, floods are actually the most common type of natural disaster in the United States.

Flash floods can occur with little to no warning and some floods develop much more slowly. Regardless of the timing, reacting to a flood quickly and proactively is key. Keep in mind the following flood safety tips:

  • Never attempt to drive, walk, or swim through flood water
  • If an area is under flood warning, seek shelter immediately
  • Avoid bridges that are over fast-moving water
  • Gather all of your emergency supplies during a flood watch or flood warning
  • Remain up-to-date on weather via the radio or local news station
  • Take your outdoor furniture and other possession inside or securely tie them down
  • If you are ordered to evacuate, turn off all utilities and close your gas valve
  • When approaching a flooded area, turn around

The above may seem like simple or obvious tips, but far too many people ignore them and end up in trouble. It can be tempting to walk or drive through flood waters, but just six inches of moving water can knock down a person on foot and just a foot of moving water can sweep away a car. This rainy season, be sure to keep these flood safety tips in mind for your and your family’s safety. If your home has suffered any water damage due to flooding, be sure to contact the professionals at SERVPRO right away!

Immediate response is key

3/6/2018 (Permalink)

Water emergencies don’t wait for regular business hours and neither do we. SERVPRO of North Miami provides emergency cleaning and restoration services 24 hours a day, 7 days a week—including holidays. 

In many cleaning and restoration situations, immediate action is needed. An immediate response helps to minimize the damage and the cleaning and restoration costs:

Within Minutes

  • Water quickly spreads throughout your property, saturating everything in its path.
  • Water is absorbed into walls, floors, upholstery, and belongings.
  • Furniture finishes may bleed, causing permanent staining on carpets.
  • Photographs, books, and other paper goods start to swell and warp.

Hours 1 - 24:

  • Drywall begins to swell and break down.
  • Metal surfaces begin to tarnish.
  • Furniture begins to swell and crack.
  • Dyes and inks from cloth and paper goods spread and stain.
  • A musty odor appears.

48 Hours to 1 Week:

  • Mold and mildew may grow and spread.
  • Doors, windows, and studs swell and warp.
  • Metal begins to rust and corrode.
  • Furniture warps and shows signs of mold.
  • Paint begins to blister.
  • Wood flooring swells and warps.
  • Serious biohazard contamination is possible.

More Than 1 Week:

  • Restoration time and cost increase dramatically; replacing contaminated materials and structural rebuilding may be extensive.
  • Structural safety, mold growth, and bio-hazard contaminants pose serious risks to occupants.

Traveling Water

3/1/2018 (Permalink)

The biggest mistake made by unit owners during water damages is to assume that if there is no visible water then there are no affected materials. Yet, water travels through porous materials in unbelievable ways.  On the initial day of the water loss, walls may read dry. But the next day the walls can show that they are wet due to the water traveling its way down through the drywall. That is why it is important to let SERVPRO technicians perform proper inspections each day that they return to the unit to monitor the equipment already in place. A thorough inspection is done with the use of infrared cameras that detect humidity and moisture meters that penetrate the surface of materials that may possibly be affected. 

Spring Showers

3/1/2018 (Permalink)

Rain is necessary to help flowers and trees bloom, and that’s great! But sometimes all that water can cause damage to your home or business.

Yet there are ways to prepare.

  • Take a look at rain gutters. Clogged gutters will cause rainwater to backup, damaging your roof and walls.
  • Do a roof inspection. Are any shingles loose or damaged? Replace any that could be an issue to protect attic or work space from water damage.
  • Check interior walls and ceilings for signs of water damage; this could be an indication of roof leaks.
  • Trim any trees and bushes next to your business. Be sure to cut back branches that could break off, damaging property.
  • Ensure that all doors and windows are secure, and that weatherstripping is in good condition.
  • Make sure the city drains near your business are clear of debris and earth. Call the Public Works Department if you think there may be an issue.

Preparedness in the event of any kind of extreme weather is always a good idea, to protect your business and property from loss and damage. Taking the time to assess your situation and thinking ahead about what may come is a good way to keep your investment secure.

Until help arrives...

1/25/2018 (Permalink)

Water damages occur spontaneously which is why they quickly cause structural damages. Yet there are numerous ways to minimize the damages until SERVPRO arrives on site:

  • Shut off the main water line from your home or business if the cause of loss is a burst pipe.
  • In case of a large flood, disconnect any appliances that are affected to prevent electrical issues. 
  • Begin removing standing water. The longer the water sits, the more damage it will cause. 
  • Place aluminum or wood blocks between furniture and carpet flooring to prevent staining. 

Once SERVPRO crews are on site, the damages will be assessed, any standing water will be extracted, the necessary materials will be removed and equipment will be set to facilitate the drying process. Our crews will leave the job site as "if it never even happened."

Appliances Most Likely to Leak

1/20/2018 (Permalink)

Leaky appliances are one of the most common causes in water damage for both homes and commercial spaces. Unfortunately, many people do not recognize that a leak is occurring before the damage has been done. What often starts as a small, unnoticeable leaks turns into a major problem with serious damage. Things like mold growth, wood rot, and damage to carpets, flooring, and drywall typically follow water damage. On top of that, structural damage might be caused which can be extremely costly for a homeowner or commercial property owner. As such, being aware of the appliances most likely to leak is essential to preventing damage from happening in the first place. When attentive to appliances that are vulnerable to leaks, you are putting yourself in a position to recognize an issue immediately and thus minimize the water damage.

Household appliances each pose a unique threat when it comes to possible leaking and water damage. Far too often a homeowner fails to identify when an appliance is not functioning at full capacity. In this case, the problem is only clear when there is a puddle on the floor in the laundry room or in the kitchen. It is important to be aware of the appliances most likely to leak, they are as follows:

  • Washing Machine
  • Refrigerator
  • Water Heater
  • Dishwasher
  • Kitchen Sink Drain Line
  • Heating and Cooling Equipment

Most Florida homes have all of the above appliances. The most common causes of leaks are things like broken seals, damaged pipe joints, clogged lines, loose water connectors, corrosion, high water pressure, quick changes in temperature, and tree roots interfering with water lines. If you believe you may have a leaking appliance in your home or commercial property, it is important to contact our team of highly trained water damage specialists right away. Call us today if you have any type of flood damage or water damage and our SERVPRO experts will respond immediately.

Most Common Causes of Water Damage in Your Home

12/22/2017 (Permalink)

Water damage in a residential property is often caused by things like water leaking or flooding that goes unnoticed for a long period of time. Damage of all kinds can wreak havoc on your property when excess water starts to pool in an area of the home. Unfortunately, most homeowners are unaware of the signs and warnings of water damage and therefore leave the issue unresolved, eventually causing further damage. Water damage restoration is the process of removing the water, drying and dehumidifying, clean and sanitizing, and then restoring the area to its original state. From minor repairs to carpet replacements, identifying water damage early is the key to minimizing potential damage to your home.

The ability to recognize signs of water damage is the first step in keeping your property in top condition. As such, it is important to understand the most common causes of water damage in your home. They are as follows:

  • Leaking pipes, bursting pipes, or broken hoses
  • Malfunctioning air conditioners or other HVAC issues
  • Broken dishwashers, washing machines, or other household appliances
  • Sewer backup, clogged drains, or general plumbing problems
  • Water buildup in areas like attics or crawl spaces
  • Natural disasters like hurricanes or rainstorms that cause flooding
  • Running toilets
  • Bathtub overflows
  • Malfunctioning fire sprinkler system

No matter what the water damage cause may be, addressing the problem immediately is imperative to reducing damage and restoring the area back to optimal condition. At SERVPRO, our water damage specialists have the experience, expertise, and equipment to restore your property quickly and efficiently. From floods to leaking pipes, our water removal and cleanup process will make your home look “Like it never even happened”. Contact our office as soon as possible to learn more about how our Disaster Recovery Team can help you and your home today!

How to spot water damage

3/6/2017 (Permalink)

In general, a house is one of the biggest investments you will make in your lifetime. In order to protect that investment, you should vigilantly look out for household problems and address them before they worsen.

One such dreaded homeowner issue is water damage. If left unattended, residential water damage can detrimentally impact the structure or spawn other complications, including mold that poses a health risk to inhabitants. Here are several methods for detecting water damage within your house.

1. Check the Floors
No matter what kind of flooring you have, it will manifest signs of water damage. For tile and wood, look for cracked, buckling or warped flooring. When it comes to carpet, be wary of damp spots, gradual rises, soft spots or the smell of mold and dampness.

2. Look for Stains
Water stains on the floor around the bathtub, toilet or sink, as well as stains on ceilings and walls, are some of the most obvious signs of water damage. Unusual stains could indicate there is a leaky pipe or drain inside the wall. Cracks in the drywall or areas that appear swollen and are soft to touch also may signify trouble. Peeling paint is another sign of loose water within wall spaces. As the drywall gets saturated, paint can lose adhesion.

3. Inspect Outside
Observe the exterior of your house. What you want to look for are pools of standing water that can indicate poor drainage in the yard, gutter spouts that aren’t transporting water far enough from the house or leaky rain gutters. Any of those issues could threaten the foundation of your house. Additionally, common signs of water damage on the roof may include pools of water; cracked, curled or missing shingles; or broken flashing.

4. Watch for Rust and Mold
Inspect your water heater and check for rust on the tank or damp spots on the floor. A rusted tank could indicate a slow leak. Additionally, corrosion around pipe connections could be caused by water seepage. Visual signs of active mold growth mean moisture is contacting microscopic mold spores, often in the nooks and crannies of your home. Finally, don’t rely solely on sight. When water stagnates, mold and bacteria can grow, producing a musty, unpleasant smell.

How to Locate Leaks with a Moisture Meter

1/3/2017 (Permalink)

When it comes to leaks in a structure, whether that structure is an office or a home, timeliness is of the utmost importance in minimizing the cost of a leak. Leaks not only add to the cost of a utility bill, the damage caused by water intrusion into the structure can require thousands of dollars of remediation and repair.
For many common leaks, finding and fixing the source of the problem is relatively straightforward. For example, a leaky faucet or shower head might require the tightening or replacement of a seal, and the source of the leak is in plain sight. However, not all leaks occur in simple, easy to reach or see spots. Sometimes, water intrusion occurs in places where you cannot immediately see it, such as behind a wall or in the ceiling, where the visible signs of a leak might not appear right away.

Moisture meters are a very helpful tool for detecting the presence of moisture in building materials, and for helping to pinpoint the source of that moisture intrusion, even when the origin point may be out of sight.

“How so,” you ask?

Tracing Leaks in Dry Plaster, Brick, and Concrete
Masonry materials such as dry plaster, brick, and concrete typically have very little moisture in them. Sometimes, when these materials are tested with a moisture meter in a reference scale mode, there is so little moisture that the meter cannot detect it.
Thankfully, if you find moisture in one of these materials, there’s a trick you can use to pinpoint the origin point of a leak in masonry materials. To pull it off, you’ll need the following:

A nail, one made of a ductile metal.
Insulated wire.
A pin-type moisture meter such as the BD 2100.
To start the process, drive the nail into the area of the masonry that you know to be wet. Then, attach the insulated wire to the nail and one of the meter’s contact pins.
Once the wire is attached to one of the contact pins, apply the other pin to different parts of the wall where you suspect the leak may be originating from. If the meter gives a “wet” response, the wall is wet between the two contact points. If the meter gives a “dry” response, the material is not in the path of a leak.

Repeat the test until you’ve identified the limit of the “wet” response area.

This trick should help you pinpoint the origin point of a leak behind a masonry wall.

Testing Insulation for Moisture
Wet insulation loses its ability to keep a building's temperature stable, and can become a mold colony if given enough time.When loosely-packed insulation gets wet, the moisture not only ruins the value of the insulation as a means to keep the temperature of a building stable, that insulation becomes a potential host for mold. Over time, the moisture trapped in insulation will begin to affect the structures that the insulation is in contact with, causing damage.
To test insulation, you will want to use a moisture meter with extended-length probes such as Delmhorst’s 21-E electrode with #608 pins, which are insulated pins that penetrate to 3 1/4” deep (6” penetration type also available). Because only the tips of these pins are uninsulated, you’ll be able to identify just how deep into the insulation the moisture pocket goes.

While you won’t have to tear down the whole wall to get at the insulation to start testing, you will need to drill two holes that are 3/16” in diameter, set one inch apart in your siding or drywall. Once the holes have been drilled, push the pins into the holes and start taking readings at different depths using the reference scale setting of your meter. The reference scale setting will give you a qualitative reading of whether or not moisture is present in the material being tested.

When you’re finished taking readings, seal the holes that were drilled with an appropriate filler.

Depending on the distribution of moisture in the insulation, you may be able to establish whether the moisture is the result of a leak or if it is caused by condensation.

In side walls and roof insulation, moisture intrusion is generally the result of leaks in the roof or other structural defects in the side walls that allow water (such as from melting snow & ice) to penetrate the structure. During cold weather, water vapor in the air will condense, with some remaining trapped in the insulation.

Generally speaking, when moisture intrusion comes from a pipe leak in the wall, you’ll see much higher concentrations of moisture below the pipe, with little moisture being present in material above the pipe.

By using moisture meters to help you pinpoint the location of a leak in your structure, you can save time and money by letting your plumber or restoration professional know where the leak is coming from. The less time they have to spend looking for a leak, the lower your cost for labor will be.

 

FLOOD SAFETY ADVICE

12/29/2016 (Permalink)

Flood Safety!

The most important thing to consider when entering a flood damaged property is safety. There can and will be hazards all around, from problems with electrical items and natural gas appliances to contaminated water, mold and much, much more. This is not meant to be an all-inclusive list of precautions, but a list of things you might not think about. Please use common sense before entering the property. If it doesn’t appear safe, DO NOT ENTER. Call a professional to make sure.

Before you turn anything on or plug in an appliance, have an electrician check the house wiring and appliances to make sure it is safe to use.
If any of the appliances have been under water, have them dried out and reconditioned by a qualified service repairman. Do not use any electrical appliance that has not been checked out or reconditioned because it poses an electrical shock hazard and could overheat the appliance and cause a fire.
If you use any electrical equipment for cleanup, i.e. wet-dry vacuum, power tools etc. be sure they are plugged into a Ground Fault Circuit Interrupter (GFCI). Do not allow power cords to be submerged or wet. Never remove or bypass the ground pin on a three-pronged plug in order to insert it into a non-grounded outlet. Electrical circuit breakers and fuses that have been submerged need to be discarded and replaced with new.
Have all gas appliances (LP and natural gas) inspected and serviced before using. This includes gas furnaces, water heaters, cook stoves etc. If they were underwater have the gas controls replaced. Water and silt can damage gas controls and cause them to not operate properly. If you smell gas or hear it escaping, turn off the main line valve, open windows, and leave the area. Call the gas company and report the problem. Never use any electrical appliance, turn lights on or off, light a match, or us the telephone. These all may produce sparks.
Smoke detectors need to be tested before and after any work is done in the house. Smoke detectors can save your life in case of fire or smoke.
Many deaths have occurred during cleanup work while burning charcoal for cooking and staying warm. Never burn charcoal appliances inside homes, mobile homes, garages, cars, trucks, tents, or campers. Charcoal gives off carbon monoxide when burned. Carbon monoxide is odorless and can kill you.
Remember to keep household chemicals and medicines locked up or stored out of children’s reach.

Problems with Stormwater Pollution

12/21/2016 (Permalink)

Stormwater runoff is generated from rain and snowmelt events that flow over land or impervious surfaces, such as paved streets, parking lots, and building rooftops, and does not soak into the ground. The runoff picks up pollutants like trash, chemicals, oils, and dirt/sediment that can harm our rivers, streams, lakes, and coastal waters. To protect these resources, communities, construction companies, industries, and others, use stormwater controls, known as best management practices (BMPs). These BMPs filter out pollutants and/or prevent pollution by controlling it at its source.
The NPDES stormwater program regulates some stormwater discharges from three potential sources: municipal separate storm sewer systems (MS4s), construction activities, and industrial activities. Operators of these sources might be required to obtain an NPDES permit before they can discharge stormwater. This permitting mechanism is designed to prevent stormwater runoff from washing harmful pollutants into local surface waters.
Authorization Status for EPA's Stormwater Construction and Industrial Programs – Most states are authorized to implement the stormwater NPDES permitting program. EPA remains the permitting authority in a few states, territories, and on most land in Indian Country.
Population growth and the development of urban/urbanized areas are major contributors to the amount of pollutants in the runoff as well as the volume and rate of runoff from impervious surfaces. Together, they can cause changes in hydrology and water quality that result in habitat modification and loss, increased flooding, decreased aquatic biological diversity, and increased sedimentation and erosion. The benefits of effective stormwater runoff management can include:
protection of wetlands and aquatic ecosystems,
improved quality of receiving waterbodies,
conservation of water resources,
protection of public health, and
flood control.
Traditional stormwater management approaches that rely on peak flow storage have generally not targeted pollutant reduction and can exacerbate problems associated with changes in hydrology and hydraulics.

Do new rules make Florida water safer or more toxic?

10/10/2016 (Permalink)

The agency charged with protecting it says it's very safe, especially with the approval this week of a new rule that imposes limits on 39 additional toxic substances and updates allowed limits on 43 other chemicals dumped into Florida's rivers, streams and coastal waters.

"Each and every criterion protects Floridians, according to both EPA and the World Health Organization," the Department of Environmental Protection said last week after the governor's Environmental Regulation Commission approved the new water quality rule on a narrow 3-2 vote.

But environmentalists are so convinced that Florida's water will be further harmed, they are ready to go to war.

They say the new rules allow for higher levels of carcinogens and chemicals that can disrupt natural hormones to be discharged into Florida waters. They claim that weak enforcement by the Department of Environmental Protection already fails to shield Florida's drinking water from health-harming contaminants.

"That policy now says that more Floridians are expendable to cancer and other serious health diseases in order for industries to be more profitable," said Linda Young, executive director of the Florida Clean Water Network, which tried and failed to get the commission to reject the DEP's proposed rule.

The rule updates the state's water quality standards for the first time since 1992 by allowing for 23 toxics, including 18 carcinogens, to be discharged from industrial polluters at higher levels. The chemicals are among those released by oil and gas drilling companies, dry cleaners, pulp and paper producers, electricity plants, wastewater treatment plants and agriculture.

Under the new rules, at least 10 chemicals will now be allowed to be discharged into drinking water sources in amounts that exceed current drinking water standards.

"That means, if the new criteria goes into effect, then those waters could have higher levels of those chemicals than it is legal to send to homes for drinking," Young said. "So the utilities would have to get those chemicals out before putting it in our tap water.''

The Clean Water Network and numerous other environmental groups are asking the U.S. Environmental Protection Agency to reject the rule and order the state to revise it.

Florida regulators test the water bodies once every five years. They allow industries to release toxics into rivers and aquifers daily based on permits. The industries report to the DEP on how well they meet the discharge goals, and the agency orders corrective action if it believes a company has exceeded the limits.

If the EPA approves the new rules, chemicals such as benzene, beryllium, trichloroethane, dichloroeylene and at least six other toxic substances will be allowed at levels higher than what the state considers safe for drinking water, agency records show.

If there are more toxics in Florida's drinking water sources, utility companies must clean the water before piping it into homes, said Dee Ann Miller, a DEP spokesperson.

Take benzene, for example. The chemical is used as a solvent and degreaser of metals and is often found in oil and gas drilling operations, in gasoline and has been found to get into groundwater from leaking underground petroleum tanks.

The federal government uses two rules to regulate benzene and dozens of other hazardous chemicals in water. One is the Safe Drinking Water Act and the other is the Clean Water Act. EPA's recommended standard for benzene in tap water is 0, but the maximum level it will allow is 0.005 micrograms per liter.

Florida has set its benzene standard for drinking water higher than zero but lower than the maximum allowed by EPA. The DEP has set the safe standard at 0.001 parts per million, or 0.001 micrograms per liter.

That means that water coming out of your tap must have no more than 0.001 micrograms of benzene per liter "to reduce the risk of cancer or other adverse health effects," according to the DEP.

Under federal Clean Water Act standards, benzene and other chemicals are allowed at higher levels — ranging from a low of 0.58 micrograms per liter to 21 micrograms per liter, said Miller.

The current law allows for 1.18 micrograms of benzene per liter in drinking water sources. The new rules would double that level to 2 micrograms per liter, forcing water companies to clean it even more than they currently do.

Bart Bibler, a former water regulator at the DEP and former bureau chief of the water program at the Department of Health, warns that while the new regulations assume that water utilities will remove the higher levels of chemicals from Florida waters, there is nothing that protects the 4 million Floridians who rely on private water wells.

"These wells aren't tested; they're essentially unregulated," Bibler said. "Nobody is notifying them to be on alert that the chemical compounds are increasing."

 

The big benefits of plain water

10/10/2016 (Permalink)

Water, water, every where, nor any drop to drink.” Unlike Samuel Taylor Coleridge’s Ancient Mariner, who was surrounded by undrinkable salt water, most Americans have an unlimited supply of clean water to quench our thirsts.

Yet many of us turn a blind eye to it and instead reach for other beverages throughout the day, like sodas, juices, coffee, and tea, despite warnings from health experts over recent years about the added calories in sweetened beverages and the health benefits of plain water.

Now a recent study in the Journal of Human Nutrition and Dietetics provides even more evidence that we should choose water over other drinks if we want to control our weight. For the study, researchers from the University of Illinois looked at data on the eating (and drinking) habits of 18,311 adults as recorded in the National Health and Nutrition Examination Survey between 2005 and 2012.

Survey participants were asked to recall their dietary intake over two separate days. They reported their consumption of plain water (which included tap water, water from fountains and water coolers, and bottled water) as well as their consumption of other beverages like soda, fruit drinks, energy drinks, sports drinks, and sweetened bottled waters. Participants were also questioned about their intake of “energy-dense, nutrient-poor” foods, like cookies, ice cream, chips, and pastries.

On average, participants drank 4.2 cups of plain water a day and took in 2,157 calories. About 125 of those calories came from sweetened beverages, and about 432 calories came from energy-dense, nutrient-poor foods.

The researchers found that the participants who drank the most plain water in their daily diet consumed fewer total calories, drank fewer sweetened beverages, and took in less total fat, saturated fat, sugar, salt, and cholesterol. In fact, they discovered that increasing plain water consumption by one to three cups a day could decrease calorie intake by 68 to 205 calories a day. That could add up to a lot fewer calories over time — and result in significant weight loss.

These results support prior research on this topic, which has shown that drinking water before meals and that substituting water for sweetened beverages can cut down on calorie intake and improve weight control. That means people interested in losing weight and improving their overall health could benefit from incorporating more plain water into their daily diet.

So next time you’re thirsty, instead of ignoring your kitchen sink at home or the bubbler at work, take a moment to savor the one drink that’s free, refreshing, and actually good for us: plain old water.

 

 

WHAT TO DO BEFORE, DURING, AND AFTER

10/10/2016 (Permalink)

Floods are one of the most common hazards in the United States. Flood effects can be local, impacting a neighborhood or community, or widespread, affecting entire river basins and multiple states.

Not all floods are alike. Some develop slowly, sometimes over a period of days. But flash floods can develop quickly, sometimes in just a few minutes and without any visible signs of rain. Flash floods often have a dangerous wall of roaring water that carries rocks, mud, and other debris and can sweep away most things in its path.

Be aware of flood hazards no matter where you live, but especially if you live in a low-lying area, near water or downstream from a dam. Every state is at risk from this hazard.

BEFORE A FLOOD

  • Avoid building in a flood-prone area unless you elevate and reinforce your home.
  • Elevate the furnace, water heater, and electric panel if susceptible to flooding.
  • Install "check valves" in sewer traps to prevent water from backing up into the drains of your home.
  • Contact community officials to find out if they are planning to construct barriers (levees, beams, floodwalls) to stop water from entering the homes in your area.
  • Seal the walls in your basement with waterproofing compounds to avoid seepage.

DURING A FLOOD

If a flood is likely in your area, you should:

  • Listen to the radio or television for information.
  • Be aware that flash flooding can occur. If there is any possibility of that in your area, move immediately to higher ground. Do not wait for instructions to move.
  • Be aware of streams, drainage channels, canyons, and other areas known to flood suddenly. Flash floods can occur in these areas with or without such typical warnings as rain clouds or heavy rain.

If you must prepare to evacuate, you should do the following:

  • Secure your home. If you have time, bring in outdoor furniture. Move essential items to an upper floor.
  • Turn off utilities at the main switches or valves if instructed to do so. Disconnect electrical appliances. Do not touch electrical equipment if you are wet or standing in water.
  • If you have to leave your home, remember these evacuation tips:
  • Do not walk through moving water. Six inches of moving water can make you fall. If you have to walk in water, walk where the water is not moving. Use a stick to check the firmness of the ground in front of you.
  • Do not drive into flooded areas. If flood waters rise around your car, abandon the car and move to higher ground if you can do so safely. You and the vehicle can be quickly swept away.

AFTER A FLOOD

The following are guidelines for the period following a flood:

  • Listen for news reports to learn whether the community’s water supply is safe to drink.
  • Avoid flood waters; water may be contaminated by oil, gasoline, or raw sewage. Water may also be electrically charged from underground or downed power lines.
  • Avoid moving water.
  • Be aware of areas where flood waters have receded. Roads may have weakened and could collapse under the weight of a car.
  • Stay away from downed power lines, and report them to the power company.
  • Return home only when authorities indicate it is safe.
  • Stay out of any building if it is surrounded by flood waters.
  • Use extreme caution when entering buildings; there may be hidden damage, particularly in foundations.
  • Service damaged septic tanks, cesspools, pits, and leaching systems as soon as possible. Damaged sewage systems are serious health hazards.
  • Clean and disinfect everything that got wet. Mud left from floodwater can contain sewage and chemicals.

Floods and flash floods occur within all 50 states and can be extremely dangerous. They are the most common and widespread of all natural disasters next to fire, so knowledge and preparation is extremely important and will help keep losses to a minimum.

Source: www.fema.gov/hazard/flood/index.shtm

7 THINGS YOU SHOULD DO FOLLOWING A FLOOD

10/10/2016 (Permalink)

 Flooding can be a scary, dangerous disaster, and if not dealt with swiftly and properly after the fact, you could be in for even more lingering effects. It is recommended to bring your home back into good repair as soon as you can, so as to protect your health (such as from mold) as well as preventing further damage.

But how do you do that? Great question. Let’s dive in (pun intended) and learn more about what you should do following a flood. Floodsmart.gov has many great suggestions, some of which we’ll be looking at in this article.

Take Pictures

While you will probably want to share your experience on social media, the pictures you take of the damages can - and should - be used by your insurance company when processing your claims. So before you start cleaning out and clearing up, make sure you photograph the mess your home is in, or else risk losing out on some coverage.

 Stay Healthy

Floodsmart.gov recommends boiling all water for drinking and cooking until local authorities deem your water supply is safe. Because flood water can bring in a host of contaminates (including sewage, muck, and other things you don’t want in your system), you’ll want to make sure you have a way to treat your water before drinking it. Otherwise, be prepared to get a lot of bottled water from the store.

Since flood water can be super nasty, it’s best to wear rubber boots to keep the water away from your skin. Likewise, wear gloves and other protective clothing while working to clear your house of leftover water and debris.

Keep Power Off

If you’re wading around in your flooded home, the last thing you want is to be zapped by a live current. Turn your power off and you’ll be just fine.

Remove Wet Contents Immediately

Mold grows quickly

Make sure you get rid of all your wet belongings to avoid as much as possible. Washing walls and floor will also help keep mold out. Unfortunately, in order to clean floors, you might have to tear it out and replace it. But that’s better than leaving a flooded floor inside and having mold grow underneath it, which will cause health problems later on.

File an Insurance Claim

This goes without saying, but you need to have a flood insurance policy before you can actually file a claim. And remember, that policy needs to be purchased at least 30 days before a flood, or else the claim is void.

Remove Water

 Unless you’re happy with your new built-in swimming pool, it’s time to remove the water from your home. Buckets are one way to bail out your home, but a more effective way is to use a sump pump. You can find these at most home supply stores. A wet vac is also necessary to dry up that water, which will also help reduce mold growth.

 

Avoid Flooded Water

 Lastly, avoid flood water in streets, yards, or anywhere else. Dangerous debris can harm you. If you get cut while standing in that water the dirty, deadly contaminants and organisms can creep in to your wound and infect it, compromising your health. Flood waters may also continue to have a strong current, and even shallow water can sweep you off your feet. So be very careful around flood waters.

Floods are the most common disaster in the United States and can be very dangerous and devastating. Make sure you know what to do following a flood before it happens, so when it does come you can go right to work.

 

How to prepare for a flood

9/23/2015 (Permalink)

FLOOD BASICS

Flooding is the most common natural disaster in the United States and can happen anywhere. How to Prepare for a Flood explains how to protect yourself and your property, and details the steps to take now so that you can act quickly when you, your home, or your business is in danger.

  • WHAT:

    Flooding is an overflowing of water onto land that is normally dry. Flooding may happen with only a few inches of water, or it may cover a house to the rooftop.

  • WHEN:

    Flooding can occur during any season, but some areas of the country are at greater risk at certain times of the year. Coastal areas are at greater risk for flooding during hurricane season (i.e., June to November), while the Midwest is more at risk in the spring and during heavy summer rains. Ice jams occur in the spring in the Northeast and Northwest. Even the deserts of the Southwest are at risk during the late summer monsoon season.

  • WHERE:

    Flooding can happen in any U.S. state or territory. It is particularly important to be prepared for flooding if you live in a low-lying area near a body of water, such as a river, stream, or culvert; along a coast; or downstream from a dam or levee.

  • HOW:

    Flooding can occur in several ways, including the following.

    1. Rivers and lakes cannot contain excessive rain or snowmelt.
    2. Excessive rain or snowmelt cannot be fully absorbed into the ground.
    3. Waterways are blocked with debris or ice and overflow.
    4. Water containment systems break, such as levees, dams, or water or sewer systems.
    5. Strong winds from tropical storms or hurricanes cause a storm surge by pushing seawater onto land.

    The speed and duration of flooding can vary significantly.

    1. Flooding can occur slowly as rain continues to fall for many days. This type of flooding, sometimes called a slow-onset flood, can take a week to develop and can last for months before floodwaters recede.
    2. Rapid-onset floods occur more quickly, typically developing within hours or days. These types of floods usually occur in smaller watersheds experiencing heavy rainfall, particularly in mountainous and urban areas, and the water usually recedes within a few days.
    3. Some rapid-onset floods known as flash floods occur very quickly with little or no warning, such as during periods of extremely heavy rain or when levees, dams, ice jams, or water systems break. Densely populated areas are at a high risk for flash floods. In urban areas, flash floods can fill underpasses, viaducts, parking structures, low roads, and basements.
    4. The strong winds of a tropical cyclone or hurricane can push large amounts of seawater up onto the land, causing a storm surge. A storm surge combines with the ocean’s tide to produce a storm-tide surge. Storm-tide surges have been registered as high as almost 35 feet above normal sea level and can cause significant flooding across a large area. This generally occurs over a short period, typically 4 to 8 hours, but in some areas, it can take much longer for the water to recede to its pre-storm level.
  • IMPACT:

    The physical destruction caused by flooding depends on the speed and level of the water, the duration of the flood, terrain and soil conditions, and the built environment (e.g., buildings, roads, and bridges).

    1. Flooding can cause fatalities and serious injuries for people who are trapped or swept away by wading in, driving through, or boating across floodwaters.
    2. Transportation routes, power, water, gas, and other services may be disrupted.
    3. Commercial supplies and government support systems may be temporarily unavailable.
    4. Drinking water supplies and wells may become polluted.
    5. Floodwaters can cause erosion, which can damage roads, bridge structures, levees, and buildings with weak foundations, causing their collapse without warning. The floodwaters may carry the worn-away mud, rocks, and other sediment.
    6. Landslides and mudslides can occur.
    7. Even a few inches of floodwater in a home can cause tens of thousands of dollars in damage.

Resource

America's PrepareAthon! www.ready.gov/prepare